Properties
Events
About
Displays the about dialog box for the NED VUGauge control.
[Back to
Top]
BackColor
Sets the background color.
[Back to
Top]
BorderColor
Color of the border. The border is the region between the
outer and inner bevels.
[Back to
Top]
BorderWidth
Width of the border in pixels.
[Back to
Top]
FaceColor
Color of the dial area inside the gauge.
[Back to
Top]
HighAlarm
Gauge position value that will cause a high alarm event.
[Back to
Top]
HighAlarmColor
Color of the band on the gauge that represents high alarm
values.
[Back to
Top]
HiliteColor
Color of the top and left sides of the inner and outer
bevels if the bevel properties are set to "Raised" or "Solid".
Color of the bottom and right sides if the bevel properties are set to "Inset".
[Back to Top]
InnerBevel
Solid (2), Inset (0), or Raised (1).
[Back to
Top]
InnerBevelWidth
The width of the inner bevel in pixels.
[Back to
Top]
LowAlarm
Gauge position value that will cause a low alarm event.
[Back to
Top]
LowAlarmColor
Color of the band on the gauge that represents low alarm
values.
[Back to
Top]
Max
Maximum value. This must be greater than the minimum
value.
[Back to
Top]
Min
Minimum value. This must be less than the maximum value.
[Back to
Top]
NeedleColor
Color of the needle.
[Back to
Top]
NormalColor
Color of the arc between the high and low alarm regions.
[Back to
Top]
Orientation
South(0), West(1), East(2), North(3)
[Back to
Top]
OuterBevel
Solid (2), Inset (0), or Raised (1).
[Back to
Top]
OuterBevelWidth
The width of the outer bevel in pixels.
[Back to
Top]
Pos
Current position. This must be a value between or
including the Min and Max property values.
[Back to
Top]
ShadowColor
The color of the left and top sides of the outer and inner
bevels when the bevel styles are "Inset". The color of the bottom and right
sides when the style is set to "Raised".
[Back to Top] |